Plantronics + Polycom. Now together as Poly Logo

CCX500 ZTP Issue

Highlighted
Advisor

CCX500 ZTP Issue

Hi,

 

We have recently started to deploy CCX500 devices instead of VVX devices.

We have PDMS-E setup and DHCP options so that any devices connected to the LAN will automatically provision from PDMS-E.

 

This works as expected with the VVX/Trio devices and they are very much plug and play.

 

With the CCX devices we have noticed that the provisioning doesnt kick in until the EULA has been accepted which needs to be done on the phone. I've had a look online and i can see some provisioning settings for Trio devices which automatically accepts the EULA. This can be found here: https://knowledgebase-iframe.polycom.com/kb/viewContent.do?externalId=26718

 

Will the config explained in this article apply to the CCX devices?

 

Thanks,
Robert

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: CCX500 ZTP Issue

Hello ,

 

Welcome back to the Poly Community. 

 

Using a similar configuration to the below should setup the phone:

<PHONE_CONFIG>
   <DEVICE_SETTINGS 
device.set="1" 
device.eulaAccepted.set="1" 
device.eulaAccepted="1" 
prov.eula.accepted="1"/>
</PHONE_CONFIG>


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2