Plantronics + Polycom. Now together as Poly Logo

Trio Basic Auth Config feature.exchange.allowBasicAuth Deprecation

SOLVED
Lee_S_BJN
Occasional Contributor

Trio Basic Auth Config feature.exchange.allowBasicAuth Deprecation

Hello!

 

Does anyone know if Polycom plans to deprecate the Poly Trio configuration parameter, "feature.exchange.allowBasicAuth"?

Lee Snyder
Tags (2)
Message 1 of 4
1 ACCEPTED SOLUTION

Accepted Solutions
SteffenBaierUK
Polycom Employee & Community Manager

Re: Trio Basic Auth Config feature.exchange.allowBasicAuth Deprecation

Hello @Lee_S_BJN ,

Welcome back to the Poly community.

Some or a couple of your old post(s) or reply(s) to them => here <= are still open/pending as you have not marked these as "Accept as a solution" or at least provide some form of feedback or answer.

If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.

Could you therefore kindly go over them and mark or answer as appropriate?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilise the community more efficiently. Please do not simply mark them without any type of feedback.

 

For your new question, I am not sure I understand the question. The parameter has been part of the Trio software since UC Software 5.9.1 and is still in the current 7.0.0 version

 

From your community handle, I assume you work for a Video provider so I am pretty sure our development teams have ways of communicating directly with each other. What is the reason behind the question? 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 4
3 REPLIES 3
SteffenBaierUK
Polycom Employee & Community Manager

Re: Trio Basic Auth Config feature.exchange.allowBasicAuth Deprecation

Hello @Lee_S_BJN ,

Welcome back to the Poly community.

Some or a couple of your old post(s) or reply(s) to them => here <= are still open/pending as you have not marked these as "Accept as a solution" or at least provide some form of feedback or answer.

If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.

Could you therefore kindly go over them and mark or answer as appropriate?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilise the community more efficiently. Please do not simply mark them without any type of feedback.

 

For your new question, I am not sure I understand the question. The parameter has been part of the Trio software since UC Software 5.9.1 and is still in the current 7.0.0 version

 

From your community handle, I assume you work for a Video provider so I am pretty sure our development teams have ways of communicating directly with each other. What is the reason behind the question? 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 4
Lee_S_BJN
Occasional Contributor

Re: Trio Basic Auth Config feature.exchange.allowBasicAuth Deprecation

Thank you for your help. I am aware of the config parameter being added back in 5.9.1, but I wasn't sure that it was here to stay or if it would be deprecated.

Lee Snyder
Message 3 of 4
SteffenBaierUK
Polycom Employee & Community Manager

Re: Trio Basic Auth Config feature.exchange.allowBasicAuth Deprecation

Hello @Lee_S_BJN 

 

I am unable to comment on unreleased future version but should Poly decide to remove his or any other parameter you are not forced to upgrade your software.

 

Best regards

 

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 4 of 4