Hosted Teams/SfB on VVX 601 on Firmware 188.8.131.5273 and 184.108.40.20647
Incoming call is answered by Auto Attendant and sent to Call Queue
Admin assistant answers call (and waits for ~4 seconds for voice connection)
Using Consultative transfer mode, admin presses Transfer
Admin must stay on line until call is answered or voicemail (~7 rings)
Once voicemail begins, Transfer button appears admin presses Transfer.
"Transfer Failed" displayed on screen.
In Blind Transfer mode no issue - call rings ~7 times and then goes to voicemail. However, admin cannot announce call. Not acceptable in our business.
Does anyone else experience this and is there a solution? Ticket opened with Microsoft.
Hello @Don Delson ,
Welcome back to the Poly Community.
If you need Poly to fix anything please provide the minimum data below:
Both the communities Must Read First and the FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
As a reminder the basic information asked for:
UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup. Please rename into .TXT or Zip the file to attach.
Since UC Software 5.9.0 simply provide this via the Web Interface Diagnostics > Download Support Information Package
Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Poly to have an overview of the current software used. In addition, providing all details at the same time allow us to check logs or look up potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.
In order to raise a support ticket, you need to work with your Poly reseller as they may need to do this for you.
End Customers are usually unable to open a ticket directly with Poly support.
If this is some sort of an Internet discounter providing your MAC address or your Poly devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Poly device from.
If the unit is no longer within the warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.