vvx310 MAC 0004F2C6B0FE 22.214.171.12473 Skype for business 2015
multiple 310's take 5 to 10 seconds to connect the call after the handset has been lifted. When the phone is idle pressing any of the keys has a delay of 1 or 2 seconds between each key press. Phones were purchased 2 to 3 years ago from a different vendor that we have now and are of course out of warranty.
has anyone experienced similar issues and found a resolution?
First of all, you should be running UC Software 5.9.5 as this is the latest Poly certified software.
In addition, without seeing a backup of the actual phone, I assume it is the same as described >here<
Instead of the above, you try settings this:
<server server.log.setting.enabled="0" />
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
---------------- The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels. Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's