Plantronics + Polycom. Now together as Poly Logo

[FAQ]How to change the Flash Time on a SoundStation2 with no display

Polycom Employee & Community Manager

[FAQ]How to change the Flash Time on a SoundStation2 with no display

How to set the FLASH timing for a non-LCD display SoundStation?


The following steps describe how to set or reset the FLASH timing for a non-LCD display SoundStation:

 

First,  place the console in diagnostic mode:

  1.     Power up the console holding the MUTE key down.
  2.     Release the MUTE key after the bong is heard.

 

Note: The console must be in diagnostic mode in order to enter or view the country code!

 

To set a new FLASH Timing Code:

  1.     Press and release the # key
  2.     Press and release the * key.
  3.     All the LEDs will turn on.
  4.     Enter 6 consecutive digits between 0 - 7. (see below for a table giving the correct country code for each country and how to translate the LED patterns.)
  5.     When the 6th digit is entered, all LEDs will turn off.

 

To view the current FLASH Timing Code:

  1.     Press and release the # key.
  2.     Press and release the 9 key.
  3.     6 LED patterns are displayed consecutively each of periods 1 sec.


To reset the FLASH to factory defaults:

  1.     Unplug the phone's power source.
  2.     Press and hold the MUTE and '5' (on the dial pad) keys simultaneously.
  3.     While continuing to hold the above keys, power the phone on.
  4.     The FLASH Timing settings will now be reset to their defaults.

International Country Codes

 

NOTE: For using 300ms flash timing while in the US, enter 100000 as the country code.

 

Country

Assy

Flash msec

DTMF

JPN

AIDT

TWST

PTYP

Country Code

N. America

-001

600

0

0

0

0

0

000000

Japan

-002

600

4

5

2

0

0

045200

Australia

-012

100

6

0

2

2

0

260220

New Zealand

-013

300

4

0

2

0

0

140200

ROW, HK ,Sing

-015

600

4

0

2

2

0

040220

Korea

-016

300

4

0

2

0

0

140200

Malaysia

-021

100

6

0

2

0

0

260200

China

-022

600

4

0

0

2

0

040020

Taiwan

-023

600

0

0

2

0

0

000200

India, Thai

-036

600

4

0

2

0

0

040200

UK (Flash)

-102

100

4

0

2

2

0

240220

France

-107

300

4

0

2

2

0

140220

Switzerland

-119

100

4

0

2

2

0

240220

Ger, Nor, Swe

-120

100

4

0

2

2

0

240220

Ger, Nor, Swe

-120

75-80

4

0

2

2

0

340220

ROE, Belgium, Denmark, Finland, Italy, Netherlands,

-122

100

4

0

2

2

0

240220

South Africa

-XXX

100

4

0

2

0

0

240200

NORSTAR

-XXX

600

0

5

0

0

3

005003

 

 

Use the following table to translate the LED pattern into the proper Country Code digits:

 

Going clockwise, MUTE_LED_1 is the 8 o’clock, MUTE_LED_2 is the 12 o’clock, and MUTE_LED_3 is the 4 o’clock position, when a person looks at SoundStation with the keyboard facing him/her.

 

Digit

GREEN

MUTE LED 1

MUTE LED2

MUTE

LED3

 

 

 

 

 

0

ON

OFF

OFF

OFF

1

OFF

OFF

OFF

ON

2

OFF

OFF

ON

OFF

3

OFF

OFF

ON

ON

4

OFF

ON

OFF

OFF

5

OFF

ON

OFF

ON

6

OFF

ON

ON

OFF

7

OFF

ON

ON

ON

 

 

NOTE: It is strongly suggested that FLASH timing not be manipulated unless absolutely necessary. Changing this can cause the phone to be out of compliance for certain regulations in some countries. Polycom manufactures phones for many regions with the required settings for each country. Changing the flash timing on a US unit will not necessarily bring the phone into compliance for another country's regulations. Where possible, purchase the appropriate SKU for the given country to assure all settings are correct!

 




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 1 of 1