I have looked around and cannot seem to find an answer.
We have a customer who wants to block all outbound traffic not associated with phone traffic. What IP/URL do I need to whitelist for the phones to communicate with PDMS:SP
Welcome to the Poly Community.
TCP ports: 6800, 5222, 5223
UDP Ports: 5060, 5061, 1000 to 11000, 16600 to 16998, 19305
UDP port: 10000
OBiTALK Voice Service
Trusted IP Addresses:
18.104.22.168 UDP/TCP: 10000 to 20000, TCP 6800, TLS 443
22.214.171.124 UDP/TCP: 10000 to 20000 , TLS 443
126.96.36.199 UDP/TCP: 10000 to 20000 , TLS 443
188.8.131.52 UDP/TCP: 10000 to 20000 , TLS 443
184.108.40.206 UDP/TCP: 10000 to 20000 , TLS 443
220.127.116.11 UDP/TCP: 10000 to 20000 , TLS 443
18.104.22.168UDP/TCP: 10000 to 20000 , TLS 443
WWWI. obitalk.com HTTP/HTTPS
OBIHAI Root Certificate
If you need to install Obihai Root Certificate. Please contact
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
I have a customer that says they have opened all these ports but when I try to access the devices local config via the portal says the device is offline, even when the "Managed Devices" page reports it as "managed" with the SP1Status as "Registered". Is there any way to get a report/status that shows which firewall ports are open or not?