This is a place to post monitors (brand and model) of displays people have successfully used with the RealPresence Group Series touch features, such as the UI and VisualBoard.
Please provide the display used (brand and model), what it was used with (UI and/or VB), and the software version you were using on the RealPresence Group Series codec when you were successful with it.
Everyone appreciates your input to this list.
The purpose of this forum is to provide your feedback on your experience of the feature and to get information about the feature from Polycom product management and other users.
Software version 5.1.0 of RPG310 is operating normally in the following monitor.
BRAND: Princeton Ltd.
Thanks for the post. Hopefully others will follow suit and post their experiences.
Great news. one of our partners have tested the Philips BDL6526QT with a Group Series on version 5.1 and it works very well
Monitor 1 and 2 can be Touch Screens but monitor 2 must be Polycom Visual board software. Configuration of the monitors must be configured via the web interface page.
HDMI with audio on Monitor 1 was tested on Philips Touch screen and there is a “gotta you” switch at the rear. Released switch = Built in speaker Pressed switch = external speaker ( with also an internal configuration speaker menu)
10w Built in Speakers are very powerful.
Touch Screen is a 6 touch points but Polycom Visualboard works with only 3 touch points.
Philips Touch Screens can replace the remote and simplify the dialling.
The Polycom site lists the Sharp's PN-L702B and L703B as compatible, but before i spend some money, has anyone tested the C703B?
Where is the approved touch monitor list published?
I'm going round and round looking through PDFs.
Any help is appreciated.
interoperabilty section of the the RealPresence Group Systems release notes, which are located on the Polycom support web site.
Interactive Manu Code
VB and UI have been tested successfully
Thank you for the update.
Can you verify that the Samsung models listed also work correctly when utilizing CEC for on/off?