-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Apps, Services & Software
- Poly Software
- Re: Polycom RealPresence Mobile M500 for iPad - Connection v...
Create an account on the HP Community to personalize your profile and ask a question
11-29-2011 01:16 AM
Hello All,
I would like to ask your assistance regarding connection from the M500 software from an external network to our internal network (endpoint or meeting room on an RMX) with the help of the Polycom VBP.
- Endpoint: Polycom RealPresence M500 v1.0.2 on Apple iPad 2 iOS 5.0.1
- Gatekeeper: Polycom CMA 5000 v5.0.0.ER54
- VPN: Polycom 5300LF2-E25 v11.2.3
- Bridge: RMX 4000 v7.2.1.25
The dialing plan used from the M500 - 192.115.XXX.XXX##56YYY (X - IP address and Y - Meeting Room/Conference ID)
For some reason the connection does not go through. Just to be on the safe side I've also tried an alternate dialing method (Ad-Hoc) by 66YYY@192.115.XXX.XXX but it also did not work.
Any feedback will be most appreciated! 🙂
Best Regards,
Daniel
Solved! Go to Solution.
Accepted Solutions
12-15-2011 09:15 AM
Hi
If you are outside of your network and you are dialling through a VBP it should work Ext_IP_Address_of_VBP##RMX_Prefix
It works for me so if you can't connect there will be a local problem with your home router ( if you are at home )
VBP-ST might resolve the problem thanks to H.460 firewall traversal support.
Thanks
12-15-2011 09:15 AM
Hi
If you are outside of your network and you are dialling through a VBP it should work Ext_IP_Address_of_VBP##RMX_Prefix
It works for me so if you can't connect there will be a local problem with your home router ( if you are at home )
VBP-ST might resolve the problem thanks to H.460 firewall traversal support.
Thanks
12-17-2011 02:16 AM
Hi!
Thank you for your answer.
That was the dial plan we tried to use without success.
To be on the safe side I tried the connection from several different physical locations (even public places) but none of them worked.
We are most likely going to replace the VBP-E models with ST models.
Thanks
Didn't find what you were looking for? Ask the community