Plantronics + Polycom. Now together as Poly Logo

Polycom RealPresence Mobile M500 for iPad - Connection via VBP

SOLVED
Daniel
Frequent Advisor

Polycom RealPresence Mobile M500 for iPad - Connection via VBP

Hello All,

 

 

I would like to ask your assistance regarding connection from the M500 software from an external network to our internal network (endpoint or meeting room on an RMX) with the help of the Polycom VBP.

 

  • Endpoint: Polycom RealPresence M500 v1.0.2 on Apple iPad 2 iOS 5.0.1
  • Gatekeeper: Polycom CMA 5000 v5.0.0.ER54
  • VPN: Polycom 5300LF2-E25 v11.2.3
  • Bridge: RMX 4000 v7.2.1.25

The dialing plan used from the M500 - 192.115.XXX.XXX##56YYY (X - IP address and Y - Meeting Room/Conference ID)

 

For some reason the connection does not go through. Just to be on the safe side I've also tried an alternate dialing method (Ad-Hoc) by 66YYY@192.115.XXX.XXX but it also did not work.

 

 

Any feedback will be most appreciated! :)

 

 

Best Regards,

 

 

Daniel

 

 

Daniel
Message 1 of 4
1 ACCEPTED SOLUTION

Accepted Solutions
Piotr-P
Occasional Contributor

Re: Polycom RealPresence Mobile M500 for iPad - Connection via VBP

Hi

 

If you are outside of your network and you are dialling through a VBP it should work Ext_IP_Address_of_VBP##RMX_Prefix

 

It works for me so if you can't connect there will be a local problem with your home router ( if you are at home )

 

VBP-ST might resolve the problem thanks to H.460 firewall traversal support.

 

Thanks

View solution in original post

Message 3 of 4
3 REPLIES 3
Brian
Occasional Visitor

Re: Polycom RealPresence Mobile M500 for iPad - Connection via VBP

I am having the same trouble.  I was hoping someone in this group could help.

Message 2 of 4
Piotr-P
Occasional Contributor

Re: Polycom RealPresence Mobile M500 for iPad - Connection via VBP

Hi

 

If you are outside of your network and you are dialling through a VBP it should work Ext_IP_Address_of_VBP##RMX_Prefix

 

It works for me so if you can't connect there will be a local problem with your home router ( if you are at home )

 

VBP-ST might resolve the problem thanks to H.460 firewall traversal support.

 

Thanks

View solution in original post

Message 3 of 4
Daniel
Frequent Advisor

Re: Polycom RealPresence Mobile M500 for iPad - Connection via VBP

Hi!

 

 

Thank you for your answer.

 

That was the dial plan we tried to use without success.

To be on the safe side I tried the connection from several different physical locations (even public places) but none of them worked.

 

We are most likely going to replace the VBP-E models with ST models.

 

 

Thanks

Daniel
Message 4 of 4