Plantronics + Polycom. Now together as Poly Logo

RPM phantom SIP registrations

Advisor

RPM phantom SIP registrations

For troubleshooting, I have done a clean install of RPM and only configured H.323.  The application continues to try to register to a SIP server when none is defined, filling up the log file with the following messages. Why is this happening and can this be cleaned up?

 

1320590820240 LoggingServer.CallControl INFO: CallControl INFO [SIP STACK]: To Server 1 of 1 Retry REGISTER send 15500 of max 31500

1320590820241 LoggingServer.CallControl INFO: CallControl INFO [SIP STACK]: CUser::NeedRegisterToThisServer no server was found return false

1320590820244 LoggingServer.CallControl INFO: CallControl INFO [SIP STACK]: >>> Data Send to 172.21.115.26:5060

1320590820246 LoggingServer.CallControl INFO: CallControl INFO [SIP STACK]: REGISTER sip:RPM-Xoom@10.180.57.138 SIP/2.0

Via: SIP/2.0/UDP 10.180.57.138:5060;branch=z9hG4bKf707d35c113D94E1

From: "@RPM-Xoom" <sip:RPM-Xoom@10.180.57.138>;tag=36DEE08D-CC498D32

To: <sip:RPM-Xoom@10.180.57.138>

CSeq: 1 REGISTER

Call-ID: 3846b006-309078cb-8116c330@10.180.57.138

Contact: <sip:10.180.57.138:5060>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER"

User-Agent: Polycom RealPresence Mobile/1.0.2-11425_2912

Max-Forwards: 70

Expires: 3600

Content-Length: 0

 

JoeV
Message 1 of 3
2 REPLIES 2
Polycom Employee

Re: RPM phantom SIP registrations

I will relay this to the engineers, but I believe it's just trying to search for a sip server to register to.

Message 2 of 3
Advisor

Re: RPM phantom SIP registrations

But I did not configure SIP on purpose, so I could test H.323 without any other messaging causing confusion.  Why would it be searching for a SIP server when I have turned SIP OFF?  Please pass this to the engineers.

JoeV
Message 3 of 3