On the iPad2 I can connect using RealPresence to the VSX7000 but I only get the speaker icon on the screen and no video. The video options on the bottom of the app are greyed out. I do get audio and that works fine. I thought maybe I didn't have enough bandwidth but I ran another test standing directly under the access point (Wireless-N) and still had the same problem. If I check the stats there is no Video protocol or format shown. Call type is H323 I'm not sure what to do. I saw a post saying the same problem with an 8000 and they took off H.329 in the Polycom settings and I tried that but it didn't help. Also I have installed the 30 day trial of the M100 Polycom software, Which connects to the VSX7000 and displays video/audio no problem. Then tested the RealPresence iPad2 app with the M100 and that worked as well. Any idea's on how to get the RealPresence to see the Polycom VSX7000a Video?
Solved! Go to Solution.
I turned off Basic Mode on my VSX 7000 and I still didnt see the video on the iPad2. I have video and sound on the VSX 7000. My VSX 7000 has firmware 9.0.5 Dec 2008.
By the way will I need Basic Mode turned back on for anything?
I'd get it updated to 18.104.22.168-103 and in that section I only have H.323 checked, everything else is unchecked.
Did you try the M100 software to see if it works with your polycom? I guess that's a good test as well.
Hi I'm getting the same issue, have upgraded my VSX 7000 Firmware to 22.214.171.124-103 and just selected H.323 but still dont recevie any video from the person using the iPad2. M100 Software works to my VSX 7000 unit without any issues but try and connect to the iPad and I get the same issue must be some setting on Real Presence Mobile but I cant see anything?