Plantronics + Polycom. Now together as Poly Logo

BTOE pairing set to auto, yet it prompts for login

Occasional Visitor

BTOE pairing set to auto, yet it prompts for login

Hello

 

We are currently deploying VVX501's in our environment and we are running into an issue with BTOE pairing.

 

VVX firmware: 6.0.0.4604

BTOE version: 4.1.0

 

BTOE pairing is set to auto in our custom.cfg file with this code:

<btoe btoe.pairingMode="Auto">
</btoe>

 

When the phone reboots or the user logs off and back on, the BTOE prompt appears on their screen asking for their password. 

 

We have an "Override" folder on the Polycom server that has a .cfg file for each MAC address of phone we've deployed so far that also includes this:

<PHONE_CONFIG>
<OVERRIDES
btoe.pairingMode="Auto"
reg.1.address="first.last@company.ca"
reg.1.auth.loginCredentialType="usernameAndPassword"
/>
</PHONE_CONFIG>

 

Which seems to bypass the issue, however we'd prefer not to add one of these files for every phone we deploy. We were hoping the custom.cfg would allow us to configure this for all the phones automatically. 

 

Is there something I'm doing wrong or a known fix for this?

 

Thanks

Kevin

Message 1 of 2
1 REPLY 1
Polycom Employee & Community Manager

Re: BTOE pairing set to auto, yet it prompts for login

Hello @kneves ,

 

Welcome to the Poly Community.

 

First of all, if you have not been specifically advised by Poly support, you should not be running UC Software 6.0.0 for Skype for Business setups.

 

UC Software 5.9.5 is the latest Poly certified software for Skype for Business.

 

Secondly, I am unsure if you understand the parameter

btoe.pairingMode

The above is used to enable the BToE application to communicate with Skype for Business client on the PC to exchange the user credentials. You will still need to input the user's password to pair via BToE.

 

In addition, this may simply come down to this:

 

Aug 01, 2017 Question: Why am I unable to activate BToE using a VVX phone and Skype for Business Online?

Resolution: Some parameters are provisioned via Skype for Business online as explained in this post => here <=

 

In regards to rolling out features globally instead of individually have a look at:

 

Oct 7, 2011 Question: What is the relevance of the 000000000000.cfg or <mac>.cfg?

Resolution: Please check => here <=

 

Setting this to manual requires the user to get the PIN for the BToE Widget and then pair the Phone with the BToE Client. 


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2