[FAQ] Pairing a Polycom Visual+ or Polycom GroupSeries with a Polycom Trio
Pairing a Polycom Visual+ or a Polycom GroupSeries (running at least 6.1.8) with a PolycomTrio requires the units to be on the same VLAN or ensure the network traffic can be routed (more => here <=)
In order to manually pair the Visual+ please go ahead and follow these steps:
Press Settings Key
Enter the Admin Password (default 456)
Select Networked Devices
Select the relevant Unit matching the MAC address
Browse to the IP address of the Polycom Trio (ensure the web interface is enabled as shown => here <= ) Settings => Networked Devices => Networked Devices (Networked Device UID is the MAC Address of the Polycom Visual+ or Polycom GroupSeries)
Simply provision the feature from the provisioning server:
The X value would need to be replaced with the MAC address of the Visual+
<======== Signature / Disclaimer ========> Please be aware:For questions about the type of support to expect please check here
Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".
The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer. Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.