Pairing a Polycom Visual+ or a Polycom GroupSeries (running at least 6.1.8) with a PolycomTrio requires the units to be on the same VLAN or ensure the network traffic can be routed (more => here <=)
Option 1:
In order to manually pair the Visual+ please go ahead and follow these steps:
- Press Settings Key

- Select Advanced

- Enter the Admin Password (default 456)

- Select Networked Devices

- Select the relevant Unit matching the MAC address


- Select complete

Option 2:
- Browse to the IP address of the Polycom Trio (ensure the web interface is enabled as shown => here <= )
Settings => Networked Devices => Networked Devices (Networked Device UID is the MAC Address of the Polycom Visual+ or Polycom GroupSeries)

Simply provision the feature from the provisioning server:
<PHONE_LOCAL
mr.pair.uid.1="XXXXXXXXXXXX"
/>
The X value would need to be replaced with the MAC address of the Visual+
Wireshark Trace:
Unpaired Visual+

Pairing

Paired

<======== Signature / Disclaimer ========> Please be aware:For questions about the type of support to expect please check
here Please also ensure you always check the
VoIP ,
Video Endpoint ,
Skype for Business ,
PSTN or
RPM FAQ's
Please remember, if you see a post that helped you , and it answers your question, please mark it as an
"Accept as Solution".
The title
Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my
personal experience and
does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.