Plantronics + Polycom. Now together as Poly Logo

Fast Busy when calling using VVX phones


Fast Busy when calling using VVX phones

When we place a skype call to some of our users using a Polycom VVX phone (400 or 600 series),  We receive a fast busy.  If I call that same user using the skype client (and performing a skype call)  it works fine.  PSTN callss to that user works fine using the VVX phone.


Attached is the log from one of the VVX phones that is placing the called.


Polycom Employee & Community Manager

Re: Fast Busy when calling using VVX phones

Hello RobYoung,,

welcome back to the Polycom Community.

Did this ever work or has this only recently failed? What is the difference between the users ? Have you tested against UC Software 5.6.0 yet ?


INGRAM MICRO CANADA is your Tier 1 support so maybe work with them to get this into Polycom support.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 3

Re: Fast Busy when calling using VVX phones

We have found that the odd time when a user leaves a remote session open for a very extended time(in our case a Xendesktop)  it can cause an issue calling these users with a Polcom set.  Once we logoff their remote computer session, we can place a call to the user again using a Polcyom set.  In the last case we had seen, the remote session was several weeks in a disconnected state.


Just an FYI.



Message 3 of 3