Showing results for 
Search instead for 
Did you mean: 

Module Logging Level for RTCP Errors on Trio 8800


Module Logging Level for RTCP Errors on Trio 8800

We have been testing 5.4.5 AA firmware on a Trio 8800 (2201-65890-019) and have been getting more RTCP errors then normal.


The errors prior to the update were limited to a few we see rarely and the following repeated twice when connecting a call:

0406110900|so   |5|00|soStreamNetDisc ERROR - Cannot remove ICE RTP channel

0406110900|so   |5|00|soStreamNetDisc ERROR - Cannot remove ICE RTCP channel


Those errors are now usually followed by 25 or so lines of:

0406110904|so   |5|00|[SoStreamC]: soStreamSendRtcpReport with no active session

0406110904|so   |5|00|[SoStreamC]: processReceivedRtcpPacket with no active session


Which module logging level parameter would I set to debug to see what is going on?

Message 1 of 3
Polycom Employee & Community Manager

Re: Module Logging Level for RTCP Errors on Trio 8800

Hello Scott1,

welcome back to the Polycom Community.

Support Object

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 3

Re: Module Logging Level for RTCP Errors on Trio 8800

Heads up to anyone else:  The debug level for Support Object contains way too much action to be useful (to my untrained eyes at least).  Hopefully event 1 or 2 will capture the issue.


Thanks for the quick reply Steffen!

Message 3 of 3