Plantronics + Polycom. Now together as Poly Logo

Polycom UC Software 5.9.4

Occasional Advisor

Polycom UC Software 5.9.4

I upgraded my Polycom to Software 5.9.4.

 

After that I can't access phone via web even when I configure that at configuration files.

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: Polycom UC Software 5.9.4

Hello @BudrysLP ,

welcome back to the Poly community.

Some or a couple of your old post(s) or reply(s) to them => here <= are still open/pending as you have not marked these as "Accept as a solution" or at least provide some form of feedback or answer.

If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.

Could you therefore kindly go over them and mark or answer as appropriate?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilize the community more efficiently. Please do not simply mark them without any type of feedback.

 

For your new issue you have two options:

 

  • downgrade to 5.9.3
    or
  • raise a ticket

 

In order to raise a support ticket, you need to work with your Poly reseller as they may need to do this for you.

End Customers are usually unable to open a ticket directly with Poly support.

If this is some sort of an Internet discounter providing your MAC address or your Poly devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Poly device from.

If the unit is no longer within the warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2