Plantronics + Polycom. Now together as Poly Logo

Polycom phone signing out issue

Occasional Visitor

Polycom phone signing out issue

Hello, I am trying to setup my phone at my office and I can't seem to get it to sign in. I have run through all the steps I have found online to properly login into Microsoft Lync and the X600 Polycom phone to sign in. I get to the part where it tells me to plug in the USB and to sign into Lync. I do just that and my phone will login for maybe 5 seconds at the most and just go to a white screen that says "Signing out ...". Once it goes to this screen I can't use any of the buttons on the phone, I will have to unplug the phones lan coord and plug back in to reset the phone so I can retry to log back in. I also assigned myself a pin to atleast attempt to log in just to the phone itself. This worked for a little before it signed me back out, but I did get a message once after typing in my conference pin about a certificate. The only time the phone worked and I was able to calls was when it was signed in to the previous user. If anyone can help me it would be greatly appreciated.

Message 1 of 2
1 REPLY 1
Polycom Employee & Community Manager

Re: Polycom phone signing out issue

Hello ,

Polycom and other manufacturers produce these optimized for Microsoft® Lync® or Skype® for Business devices after a reference design and the embedded OS running on the phones is provided, supported and maintained by our partner Microsoft®.

You therefore may want to reach out to the Microsoft® community and / or Microsoft® support directly instead as this is the most direct and efficient path.

Polycom is unable to add any new features into the functionality of these CX Devices

Please try here

Best Regards

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2