Plantronics + Polycom. Now together as Poly Logo

Replacement Firmware VVX201 for SFB with for SIP

SOLVED
Frequent Advisor

Replacement Firmware VVX201 for SFB with for SIP

Helllo,

 

If I have VVX201 for SFB, and i want to replace with firmware for SIP. Is it compatible the firmware for SIP if i loaded into VV201 SFB?

 

Thanks.

Sinjo

Message 1 of 13
12 REPLIES 12
Polycom Employee & Community Manager

Re: Replacement Firmware VVX201 for SFB with for SIP

Hello Sinjo,

welcome back to the Polycom Community.

Simply press 1,5 and 3 together to factory reset. After this comes back press 1,4 and 9 together to set to Generic Profile.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 13
Frequent Advisor

Re: Replacement Firmware VVX201 for SFB with for SIP

Hello Steffen,

 

It's means that no need to upload the firmware for open/generic SIP? Just simply reset factory default and setting back to generic profile? And the VVX201 can use for Generic SIP PBX such as Asterisk based IP PBX. Am i correct?

 

Thank you.

Sinjo

Message 3 of 13
Polycom Employee & Community Manager

Re: Replacement Firmware VVX201 for SFB with for SIP

Hello Sinjo,

YEs our software is dual stack. Simple switch the profile after a factory reset.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 13
Frequent Advisor

Re: Replacement Firmware VVX201 for SFB with for SIP

Hello Steffen,

 

Is there  hardware difference inside the VVX201 SFB and open SIP?

 

Thank you.
Sinjo

Message 5 of 13
Polycom Employee & Community Manager

Re: Replacement Firmware VVX201 for SFB with for SIP

Hello Sinjo,

There are no hardware differences between a LYNC / Skype SKU and a Generic SKU.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 6 of 13
Frequent Advisor

Re: Replacement Firmware VVX201 for SFB with for SIP

Hello Steffen,

 

Ok. Thank you very much for your help.

Close this subjet.

 

Sinjo S.B.

 

 

Message 7 of 13
Frequent Advisor

Re: Replacement Firmware VVX201 for SFB with for SIP

Hello Steffen,

 

After i press 1,4, and 9 back to Generic Profile, i open the browser to open VVX 201 web configuration and user name : admin/password : 456 but can not login. The message "authorization failed". Can you help why it failed?

 

Thank you.

Sinjo

Message 8 of 13
Polycom Employee & Community Manager

Re: Replacement Firmware VVX201 for SFB with for SIP

Hello Sinjo,

what browser are you using? Have you tried a different browser yet?

 

I suggest bringing this to the attention of support.

In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

If this is some sort of an Internet discounter please post your phone's MAC address so I can look up who would be able to support you.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 9 of 13
Frequent Advisor

Re: Replacement Firmware VVX201 for SFB with for SIP

Hello Steffen,

 

After trying several version of Firefox, the VVX 201 firmware ver 5.6.0.823 was ok with Firefox version 49.0.2

 

Thank you.

Sinjo

Message 10 of 13