-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Phones
- UC Platforms
- Trio 8800 v5.5.4.2255 shows details of a meeting supposed to...
Create an account on the HP Community to personalize your profile and ask a question
08-21-2018 04:53 PM
Hello,
According to this FAQ, I uploaded the config file onto our Trio, but this didn't make any change, the phone still displays all the meeting info although the meeting was set as "private" in Office 365. See the code below.
<?xml version="1.0" standalone="yes"?> <!-- Change the way Exchange Calendar Meeting Displays are shown --> <!-- Possible values are 0 or 1 Default is shown below --> <!-- exchange.meeting.private.enabled Enable / Disable the privacy feature--> <!-- exchange.meeting.private.promptForPIN 1 Prompt for a PIN --> <!-- exchange.meeting.private.showAttendees 0 Show Attendees --> <!-- exchange.meeting.private.showDescription 0 Show the Meeting Description --> <!-- exchange.meeting.private.showLocation 0 Show the Meeting Location --> <!-- exchange.meeting.private.showMoreActions 1 Show the Meeting More Actions --> <!-- exchange.meeting.private.showOrganizer 1 Show the Meeting Organizer --> <!-- exchange.meeting.private.showSubject 0 Show the Meeting Subject --> <test exchange.meeting.private.enabled="1" exchange.meeting.private.promptForPIN="0" exchange.meeting.private.showAttendees="0" exchange.meeting.private.showDescription="0" exchange.meeting.private.showLocation="0" exchange.meeting.private.showMoreActions="0" exchange.meeting.private.showOrganizer="1" exchange.meeting.private.showSubject="0" />
I tried rebooting the device after, but this didn't help. I noticed the FAQ was written more than a year and a half ago. Did something change meanwhile, maybe?
Thanks!
Solved! Go to Solution.
Accepted Solutions
08-22-2018 09:24 AM
Hello @Leprechaun,
welcome to the Polycom Community.
Its always useful to double check against the backup of a unit rather than simply trusting a configuration.
I briefly tested this against the currently latest and supported software 5.7.1.4095 and if set as private no details are shown when using the factory defaults.
I would suggest to update the unit and re-test and double check the configuration and if it still fails open a ticket.
In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.
End Customers are unable to open a ticket directly with Polycom support.
If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.
If the unit is no longer within warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
08-22-2018 09:24 AM
Hello @Leprechaun,
welcome to the Polycom Community.
Its always useful to double check against the backup of a unit rather than simply trusting a configuration.
I briefly tested this against the currently latest and supported software 5.7.1.4095 and if set as private no details are shown when using the factory defaults.
I would suggest to update the unit and re-test and double check the configuration and if it still fails open a ticket.
In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.
End Customers are unable to open a ticket directly with Polycom support.
If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.
If the unit is no longer within warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
Didn't find what you were looking for? Ask the community