Plantronics + Polycom. Now together as Poly Logo

Trio8800 limit max volume

Occasional Visitor

Trio8800 limit max volume

Hi, we have Polycom Tio8800 on firmware connected to Skype for Business 2015.

Is it possible to set a limit on the maximum speaker volume? We have some phones in an open area and want to stop users setting the volume higher than 70% - 80% to not disturb nearby workers.

Message 1 of 3
Polycom Employee & Community Manager

Re: Trio8800 limit max volume

Hello @AV Mark ,


Welcome to the Poly Community.

Similar questions where asked >here< or >here<


I forwarded this to product management but you should really follow this up via the official method described here:


Jan 03, 2013 Question: How can I request a change aka feature request to the current Polycom SIP / UC Software?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 3
Frequent Advisor

Re: Trio8800 limit max volume

Hi AV Mark,

as a workaround you could use PoE instead of PoE+ which limits the peak level output, but I'm not sure how many dBs it is attenuated by this. ;-)




Message 3 of 3