cancel
Showing results for 
Search instead for 
Did you mean: 

VVX 600 Stuck in Loop

Highlighted
Visitor

VVX 600 Stuck in Loop

I have a VVX 600 phone that is stuck in a loop. I cannot break out of it. Reading through discussions, and web searches, I see that I should be able to do 1, 5, and 3 to reset back to default. It tries and then says "Error, application is not present". Going thorugh the help files that have been posted I do not see a way to resolve this issue.

 

I cannot log into the phone with a web browser, so that is not an option. It continues to restart even after trying to force roll back to factory reset. Is there a guide to help reset the phone. I know I have at least two other 600 phones that are in this same boat where they continue to restart and probably another 4 or 5 410 models doing the same thing. In all cases, we tried to update to a updated firmware by going through the web interface of the phone, it fails, and then it is stuck in a permnant reboot loop.

 

Any help would be appreciated.

 

Thank you!

 

John

 

Message 1 of 6
5 REPLIES
Polycom Employee & Community Manager

Re: VVX 600 Stuck in Loop

Hello @havertyj,

welcome to the Polycom Community.

The community's VoIP FAQ contains this post here:

Sep 27, 2012 QuestionI get the message “Error application not present / found” on my phones screen

Resolution: Please check => here <=


Not knowing anything about your setup please check the above and simply setup a local server to provision the phones from.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 6
Visitor

Re: VVX 600 Stuck in Loop

Thank you! No luck! This is the same information I had gone through after reviewing others with similar issues. I stil lhave a phone that will not start. I cannot access it from a web browser and nothing on the screen to get it started. It has been added to batch of phones that we are not able to do anything with currently. Are there any other steps on how to do this process?

 

Thank you!

 

John

 

Message 3 of 6
Polycom Employee & Community Manager

Re: VVX 600 Stuck in Loop

Hello @havertyj,

as outlined in the supplied FAQ post there is no access to the Web Interface as the application is deleted and therefore you need to interrupt the failing boot process and point to a local server.

 

I am unsure how your units got into this state and the next step, if the above is not applicable to you, is to raise a ticket.

In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

End Customers are unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 4 of 6
Visitor

Re: VVX 600 Stuck in Loop

Steffen,

 

Thank you for the reply. I have tried going through the steps and not having any luck. Are there are any other step-by-step guides or something to follow to do this process to restore a phone?

 

John

 

Message 5 of 6
Polycom Employee & Community Manager

Re: VVX 600 Stuck in Loop

Hello @havertyj,

You have not provided any details or errors you have encountered so there is not a lot we can advise.

 

How about you record a video of what you are doing so we can point you where you are going wrong?

 

The next step would be to open a ticket.


In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

End Customers are unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 6 of 6