Plantronics + Polycom. Now together as Poly Logo

VVX Paging vs. S4B User Status

Highlighted
Occasional Advisor

VVX Paging vs. S4B User Status

We selected Polycom’s VVX 410 phones because of the greater flexibility of configuration over the CX600 desk phones for our new Skype for Business rollout.  One of the features of the VVX that we were interested in was Paging since we were replacing a legacy PBX phone system in which paging was heavily used.  

 

Well its true, once configured, paging works on the VVX phones just the way we want it to.  But there is a big problem related to user status (presence) in S4B: 

 

A page, when received by a phone that a S4B user is logged into, causes the users S4B status to change!  First to ‘In a Call’ during the page, then to ‘Available’ after the page is complete, regardless of what their previous status was – totally wiping out everyone’s ‘REAL’ status.  So someone who’s status was “Away 2 hours – No IM” before a page, suddenly shows as “Available” after the page.

(this behavior exists in UC firmware versions up to 5.4.0A)

 

Since the advanced status information that S4B provides was one of the major selling points for us, this is a no-go. Very disappointing.

 

Anyone else using Paging having this experiance?

Message 1 of 7
6 REPLIES 6
Regular Advisor

Re: VVX Paging vs. S4B User Status

I agree receiving a page does not require any user interaction so should not change the user's status. 

Message 2 of 7
Polycom Employee & Community Manager

Re: VVX Paging vs. S4B User Status

Hello Arbar,

welcome to the Polycom Community.

As the status of the phone changes aka plays a Page the aggregate state will be updated.

 

If this is something that you and your users would like to change you would need to go ahead and raise a feature request.

 

Jan 03, 2013 Question: How can I request a change to the current Polycom SIP / UCS Software?

Resolution: Please check => here <=

 

I have not yet had a customer that complained about this.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 3 of 7
Polycom Employee & Community Manager

Re: VVX Paging vs. S4B User Status

Hello Arbar and all,

I brought this up with the product management team and they believe this is a Bug.

 

I have raised this as 1-1224758616 / VESC-5669 but please go ahead and raise this from your end as well so we can map this and figure out the impact on your organisation.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 7
Occasional Advisor

Re: VVX Paging vs. S4B User Status

VVX paging has been affecting the S4B status in our organization as well.  We are running UC firmware 5.3.1.0436.

Message 5 of 7
Polycom Employee & Community Manager

Re: VVX Paging vs. S4B User Status


I have raised this as 1-1224758616 / VESC-5669 but please go ahead and raise this from your end as well so we can map this and figure out the impact on your organisation.


 




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 6 of 7
Polycom Employee & Community Manager

Re: VVX Paging vs. S4B User Status

Hello all,

the latest 5.4.1 release just posted fixes this.

 

  • VOIP-108207 Receiving a PTT or Talk event on the VVX 500 and 600 during away / inactive state no longer causes the phone to set status back to available once the PTT/TALK is finished.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 7 of 7