Plantronics + Polycom. Now together as Poly Logo

polycom trio 8800 skype for business sign in

Occasional Advisor

polycom trio 8800 skype for business sign in

hi, i am having trouble signing in to skype for business (office 365) on my polycom realpresence trio but have not had any success so far. I enter my details as i normally would on the normal skype for business desktop client but on the device it just shows the signing in message on the screen forever untill i cancel it . Any ideas ? are there any adfitional settings which are required to be entered into the device prior to signing in ?

 

any help would be much aprecited 

Message 1 of 9
8 REPLIES 8
Polycom Employee & Community Manager

Re: polycom trio 8800 skype for business sign in

Hello daniels123,

welcome to the Polycom Community.

It is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer release.

This also allows yourself and others to check against current software release notes, Administrator Guides or FAQ post’s.

The above is also stated in the "Read First"

Therefore the Polycom VoIP FAQ contains this post here:

Question: How can I find out my SIP or UC Software Version of my Phone?
Resolution: Please check here

 

Also did you verify the time server as replied by yourself => here <= ?

 

Please post a log of the phone when trying to sign in.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 9
Occasional Advisor

Re: polycom trio 8800 skype for business sign in

hi,

 

uc version = 5.4.3.2007

i have set my time swerver correctly as shown in the screenshot i have attached.

 

i have uploaded the log as a series of screenshots to the following dropbox link as  there is a lot in the log.

 

https://www.dropbox.com/sh/gr0cica5shoilt1/AAApcMN8u17tx5_DblA1mQbna?dl=0

 

 

Hope that infomation helps

 

Thanks

Daniel

Message 3 of 9
Polycom Employee & Community Manager

Re: polycom trio 8800 skype for business sign in

Hello Daniel,

looking at the screenshots of your log I cannot see the phone receiving the correct time server.

 

The time is still being displayed in Linux time and you should notice this looking at the Trio display as it would not show the current time.

 

Your network team should really setup the NTP options via DHCP or allow the phone to lookup the provided NTP server.

 

The phone states in the log "Could not find IP Addess for SNTP Server"

 

The FAQ contains these posts:

 

Jan 28, 2013 Question: Time and Date flashing or unable to set time correctly

Resolution: Please check => here <=

 

and

 

Aug 24, 2015 Question:What basic network data is send and received by a Polycom phone?

Resolution: Please check this post => here <=

 

I could not find a record internally for the MAC address of the phone so I am unable to suggest what UK reseller you should contact if you need a service ticket raised.


You are having some basic network issues which you or your IT team should be able to solve.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 9
Occasional Advisor

Re: polycom trio 8800 skype for business sign in

thanks for your reply ,

 

I have spoken to my colleague who is going to look into the ntp server issue, we will see if that fixes the issue.

 

thanks 

 

daniel

Message 5 of 9
Occasional Advisor

Re: polycom trio 8800 skype for business sign in

After confirming that the time server is being provided via DHCP , i then made sure that the device was set to use the DHCP time server. After that there was then evidence of the time servers ip being picked up within the phones log. However im still not able to sign in and the error which i am recieving quite a bnit throught the log is 

 

"doDnsSrvLookupForARecordList              found no record"

 

 

any ideas on this ?

 

 

thanks 

 

Daniel

Message 6 of 9
Polycom Employee & Community Manager

Re: polycom trio 8800 skype for business sign in

Hello Daniel,

I suggest you post the whole log as we from support know what to look for.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 7 of 9
Occasional Advisor

Re: polycom trio 8800 skype for business sign in

hi, here are the screenshots of the log

 

https://www.dropbox.com/sh/5y8ldx8qh193gbt/AACqjei4kRRfgrnsdPx5KpJca?dl=0

 

hope it helps

 

thanks

 

Daniel

Message 8 of 9
Polycom Employee & Community Manager

Re: polycom trio 8800 skype for business sign in

Hello Daniel,

Again you could simply check the logs where you blanked out your organisations details and see that the error you are getting is "found no records" and in addition "invalid STS-URI"

 

There are fundamental problems in your setup and by following our Partner Microsoft's freely available advise your organisation should setup your environment in order to cater for phones.

 

There seems to be Option 43 and/or Option 120 missing and in addition various required DNS records.

Polycom does offer chargeable services to ensure your network is ready for Skype for Business so please contact a Polycom sales representative.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 9 of 9