Plantronics + Polycom. Now together as Poly Logo

AMX serial control of Group 500

edcorin
Occasional Visitor

AMX serial control of Group 500

Hi all

I'm having some serious issues with the control of a Group 500 system via RS-232 from an AMX controller. I have the cabling as per the Polycom Integrator's Reference Manual, serial port is configured for control in the codec settings, baud rates match and protocol is known to be correct as it works via IP control. The problem is that our client doesn't want the control system on his network so I really need to get the serial control working.

 

Has anybody had issues with this and found a solution as I've run out of ideas.

 

Thanks

 

 

Message 1 of 3
2 REPLIES 2
SteffenBaierUK
Polycom Employee & Community Manager

Re: AMX serial control of Group 500

Hello edcorin,

welcome to the Polycom Community.

It is always useful to include the currently used software version as issue experienced may already be addressed in a newer release. This also allows yourself and others to check against current software release notes.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 3
edcorin
Occasional Visitor

Re: AMX serial control of Group 500

Sorry, should have thought of that. I'm using version 4.1.3 of the software. This is the first version that supports the 'button' command.

 

Thanks

Message 3 of 3