Plantronics + Polycom. Now together as Poly Logo

API for EAGLE EYE 3

sergeev
Occasional Contributor

API for EAGLE EYE 3

where can i find  API for eagle eye 3 ?

it needs  for external control  (by crestron controller).

Message 1 of 6
5 REPLIES 5
Uwe_Ansmann
Honored Contributor

Re: API for EAGLE EYE 3

Hi There...

Take a look into the "Integrator´s reference manual" (Using the API) which can be found here.

 

Kind regards,
Uwe
Message 2 of 6
Ovg
Trusted Contributor

Re: API for EAGLE EYE 3

Uwe_Ansmann

 

IMHO answer isn't correct, it seems the question was about direct control EagleEye camera from Crestron or I'm not right? I also interested in this info. 

------------------------------------------------------------------
It's impossible to lead us astray for we don't care even to choose the way.
Message 3 of 6
sergeev
Occasional Contributor

Re: API for EAGLE EYE 3

That's right. 

camera starts 1080p60, but only after it connects to codec directly, it starts 1080i50.

 most of VGA extenders gives a lot of artefacts when transmits 1080p60 on a long distances, but in 1080i50 works well.

 

Message 4 of 6
Ovg
Trusted Contributor

Re: API for EAGLE EYE 3

Sergeev

 

Try  module for control EagleEye from Crestron site. May be this solve your problem

------------------------------------------------------------------
It's impossible to lead us astray for we don't care even to choose the way.
Message 5 of 6
sergeev
Occasional Contributor

Re: API for EAGLE EYE 3

unfortunately it didn't solve the problem.

so I'm here.

Message 6 of 6