Showing results for 
Search instead for 
Did you mean: 

All Group Series Endpoints dropped from call

Occasional Visitor

All Group Series Endpoints dropped from call

Call Events indicate a RAS disengageRequest received



Would like to know what triggered the disengage request that caused all endpoints to be disconnected

Message 1 of 4
Polycom Employee & Community Manager

Re: All Group Series Endpoints dropped from call

Hello tterry,

welcome to the Polycom Community.

It is always useful to include the currently used Software version as issues experienced or a question asked may already be addressed in a newer release.

Please also include if you are using any other Polycom infrastructure and the software version of this.

This also allows yourself and others to check against current software release notes, Administrator Guides or FAQ post’s.

The above is also stated in the "Read First"

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 4
Frequent Advisor

Re: All Group Series Endpoints dropped from call

These signals are pretty ubiquitous and if you dive into most of your call details on dma you should see them at the end of every h323 session. If all your sites dropped at the same time and it wasn't initiated by someone ending the conference from RMX, web app, or dtmf tone you should look at network issues. 

Message 3 of 4
Occasional Visitor

Re: All Group Series Endpoints dropped from call

Thanks Steve,


Yes from the DMA perspective the logging indicates ‘Endpoint ended the call normally.’


We do not operate an RMX MCU but instead have a Pexip Infinty MCU, in which audio calls & WebRTC calls which are both forwarded directly to the Pexip MCU did not drop. So the common denominator is the endpoints going via the DMA.


So I can rule out someone ending the conference from the RMX. This could only be done idividually from the pexip interface & they all have the same time stamp so I rule that out.


I guess you can never rule out the network but it is a bit of a cope out. What network events can initiate 4 endpoints to drop simultaniously, xxx amount of milliseconds without a packet being received? One would think the DMA would log that as an event.


Full logs have been passed onto Polycom, so will see what they come back with

Message 4 of 4