Plantronics + Polycom. Now together as Poly Logo

Best way to connect HDX to composite input

SOLVED
Highlighted
Advisor

Best way to connect HDX to composite input

Hello,

 

I have an HDX 9002 box and I need to connect the video to a composite input (long story).

 

What would be the best way of doing so? The DVI breakout is supposed to output composite via the green output if you select 'composite' on the codec but it just doesn't output anything (black screen). I also have an S-Video cable that came with the codec, it connects to the yellow and white BNC outputs near the DVI output on one end and has a standard S-Video plug on the other end. I used a little adapter to convert it to RCA, but the quality is very poor. I would, ideally, like to connect the RCA cable directly to the box.

 

Thanks,

BM3000

Message 1 of 5
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Occasional Visitor

Re: Best way to connect HDX to composite input

The White BNC on output one is your composite output. 

View solution in original post

Message 2 of 5
4 REPLIES 4
Highlighted
Occasional Visitor

Re: Best way to connect HDX to composite input

The White BNC on output one is your composite output. 

View solution in original post

Message 2 of 5
Highlighted
Advisor

Re: Best way to connect HDX to composite input

I get black and white picture when I connect to white BNC only.
Message 3 of 5
Highlighted
Advisor

Re: Best way to connect HDX to composite input

I assume this is due to the system using NTSC rather than PAL? I don't suppose there is a way of changing this?

Message 4 of 5
Highlighted
Advisor

Re: Best way to connect HDX to composite input

I changed the cable and it is now working fine. The quality is good now too. Thanks.

Message 5 of 5