Plantronics + Polycom. Now together as Poly Logo

Blue Light Blinking issue

SOLVED
Member

Blue Light Blinking issue

 

Hi, I am Majid hussain from Pakistan. I have Polycom Group 500 Video Con. My issue is that when i power it on then only blue light is blinking and no other display is showing. Software version is 6.1.0.1
 
Kindly suggest me solution.
 
 
Best Regards, Majid Hussain
Message 1 of 4
3 REPLIES 3
Polycom Employee

Re: Blue Light Blinking issue

Hello Majid,

1.Has a different power cable tried? (if available)

2.Have all the components been disconnected ? (Mics, Camera,Network Cable, ETC.)

3. Have you rebooted after disconnecting all the components?

4. Has a full factory Reset been done ? (if not done before)

Hope this helps!

Regards,
Karthik Sivaram

Please remember to "Kudo" a post that helped you and / or "Accept as Solution" if it solves your issue.

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.

Polycom employee participation within this community is not mandatory and any post or article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 4
Member

Re: Blue Light Blinking issue

Hello Karthik Sivaram,

 

I have done all the methods which you have described but still problem exist.

 Now what can i do next?

Thanks for your response.

Message 3 of 4
Polycom Employee & Community Manager

Re: Blue Light Blinking issue

Hello @Majid,

welcome to the Polycom Community.

Please open a ticket with your Polycom reseller.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 4