Plantronics + Polycom. Now together as Poly Logo

Cannot Enable “Allow Video Display on Web” option

SOLVED
Highlighted
Occasional Advisor

Cannot Enable “Allow Video Display on Web” option

From the user inferface, I cannot activate the "Allow Video Display on Web" option on my HDX 9006 release 3.1.4. I have mutliple cameras on this unit. (3) I also cannot turn on this feature at another site with a  9006 with the same release and same number of cameras. In both instances, I can scroll down to the feature, I just can't add the check mark to activate it.  Any thoughts?

Lync 2013
Skype For Business Client 15.0.4737.1000
BTOE 3.2
VVX 500's running 5.4.0
Message 1 of 8
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Occasional Advisor

Re: Cannot Enable “Allow Video Display on Web” option

Ok I found the issue. You can only enable this option by utilizing the Polycom OE remote. I was trying to use our touchscreen remote and it would not work. It would go to the feature and hilight it, but it would not place the checkmark needed to activate it. And I can say this wasn't a fluke as this happened at all 4 of my sites that utilize a touchscreen remote unit. (I maintain 21 Polycom HDX units) We just had to go to the equipment rack and activate the option with the Polycom remote itself.

 

Thanks.

Lync 2013
Skype For Business Client 15.0.4737.1000
BTOE 3.2
VVX 500's running 5.4.0

View solution in original post

Message 7 of 8
7 REPLIES 7
Highlighted
Polycom Employee & Community Manager

Re: Cannot Enable “Allow Video Display on Web” option

Hello kgornek,

welcome to the Polycom Community.

This has been asked multiple times.

 

This post => here <= for example can be found if using the search string "Allow && Video && Display" via the Polycom community search => here <=

Please ensure you always check the community FAQ and/or utilize the community search before posting any new topics or follow up post’s.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 8
Highlighted
Occasional Advisor

Re: Cannot Enable “Allow Video Display on Web” option

No actually it hasn't. I read those post and they don't apply.

 

I know how to turn on the feature. I'm stating that the feature will not allow itself to be turned on. I go to the menu, go to the "Allow Video Display on Web" option and try and checkmark the option but nothing happens. It will not let me activate the feature itself. That is the issue at hand.

Lync 2013
Skype For Business Client 15.0.4737.1000
BTOE 3.2
VVX 500's running 5.4.0
Message 3 of 8
Highlighted
Trusted Contributor

Re: Cannot Enable “Allow Video Display on Web” option

What security level do you have set on the EP?  If you have activated security it will not allow video over the web.

Message 4 of 8
Occasional Advisor

Re: Cannot Enable “Allow Video Display on Web” option

Security mode is not enabled on the units.

Lync 2013
Skype For Business Client 15.0.4737.1000
BTOE 3.2
VVX 500's running 5.4.0
Message 5 of 8
Highlighted
Member

Re: Cannot Enable “Allow Video Display on Web” option

Just a suggestion.

 

 I think HDX web remote access is still officially at Internet Explorer 9 level.

 

If you are using a newer version of IE then set the IP addresses of your HDX boxes in IE compatibility mode, then retry enabling video display on web.

Message 6 of 8
Highlighted
Occasional Advisor

Re: Cannot Enable “Allow Video Display on Web” option

Ok I found the issue. You can only enable this option by utilizing the Polycom OE remote. I was trying to use our touchscreen remote and it would not work. It would go to the feature and hilight it, but it would not place the checkmark needed to activate it. And I can say this wasn't a fluke as this happened at all 4 of my sites that utilize a touchscreen remote unit. (I maintain 21 Polycom HDX units) We just had to go to the equipment rack and activate the option with the Polycom remote itself.

 

Thanks.

Lync 2013
Skype For Business Client 15.0.4737.1000
BTOE 3.2
VVX 500's running 5.4.0

View solution in original post

Message 7 of 8
Highlighted
Respected Contributor

Re: Cannot Enable “Allow Video Display on Web” option

That is correct.  You cannot click on the check box using anything but the IR remote.   None of the "web" remotes (using Port 24 or 80) can click on this check box.   Even the API "Button select" won't allow you to check the box.   This is a security feature.

 

Glad you figured it out.

 

Gary M

Wanna' Test your H.323 System? (71.14.2.157 or 71.14.2.158)
cb157.miyakawa.us and cb158.miyakawa.us
www.miyakawa.us
www.codecsidekick.com
Message 8 of 8