Plantronics + Polycom. Now together as Poly Logo

Changing Rom Password greyed out

Trusted Contributor

Changing Rom Password greyed out

I can't figure out under what circumstances this could occur.

User wants to change Room Password & uses Room password for Remote access & admin access.

So on the web I/F Admin>General>Security>Security Settings Use Room Password for Remote Access Tick.

Tick Room & see expnded new password boxes.  Simples. Except the Use Room Password for Remote Access & Room tick boxes are greyed out.

Security profile I hear you cry.  Nope OFF & Geyed out at Minimum.

S/W updated to V3.1.1.3.  Anything for it other than factory reset or ERFL?

Pete

Message 1 of 4
3 REPLIES 3
Highlighted
Polycom Employee & Moderator

Re: Changing Rom Password greyed out

Is the EP managed by CMA or XMA?  that would mean the password is controlled by that system and the user can not change it.  Also what level is the Security settings at? 

Message 2 of 4
Highlighted
Trusted Contributor

Re: Changing Rom Password greyed out

I'll check on the CMA Provisioning, but Security isa minimum & Security Mode is unchecked.

Message 3 of 4
Highlighted
Honored Contributor

Re: Changing Rom Password greyed out

Pete,

 

It may happen if you have provision profiles for EPs in standard provisioning mode.

Check Admin  >  Provisioning Profiles  >  Scheduled Provisioning Profiles > {profile for HDX Series}  > General Settings > Security. If this page is provisioned then you can't change passwords.

 

WBR

Mike

WBR,
Mike
--------------------------------------------
“Reports that say that something hasn't happened are always interesting to me, because as we know, there are known knowns; there are things we know we know. We also know there are known unknowns; that is to say we know there are some things we do not know. But there are also unknown unknowns- the ones we don't know we don't know.”
― Donald Rumsfeld
Message 4 of 4