I need configure my HDX system with 802.1x and I made the autentication with the ID and password but the HDX didn´t send back the response and fails the connection.
The HDX's firmware is 3.0.2 and the type of the encryption is EAP - TLS.
Somebody can tell me if exist another procedure to make this or if am I missing something?
you had already replied => here <= before starting this new post.
Our current 802.1X implementation on HDX systems supports RFC 2716 only. Other protocols are not supported.
Can you provide some details if your system requires RFC 5216?
In addition would you have the information what Version of EAP is being used?
If it is EAP Version 3 the HDX does not currently support this.
Please raise a ticket via Polycom support and quote VIDEO-107246.
The authentication is through a digital certificate with the protocol EAP/TLS in all version of SSL. The problem is when I install the certificate in the HDX the authentication request doesn´t send it to ACS. The ACS is a Cisco ACS 5.3.
Can you tell me the procedure to make this authentication?