Dialing problems with integrated audio after HDX8000 Firmware upgrade
A bit stuck on this so I am hoping for a hail mary from the community here
We recently upgraded our Polycom HDX8000 units firmware to Release - 220.127.116.11-38311. Since then, our systems have been experiencing irregular issues dialing conference calls through our integrated audio set up.
All 5 of our rooms (which received the upgrade) are intermittently failing to dial audio conference calls correctly. When the problem does occur, dialing the separate conference call line works normally, but when it comes time to enter the touch tone conference code, the system doesnt recognize the touch tones, and the program does not bring up the hang up button, like the system does not know it is in a call. Also there are times the mute button flickers on and off repeatedly as if it is stuck. Rebooting the crestron processor fixes these issues. This only occured after the firmware was updated.
At first, we thought we needed to rewrite the crestron programming, to match with the upgrade firmware, but our vendor programmers have been unable to find a resolution to fix this issue. Is it possible there is a bug in the firmware that affects our current set up?
We use crestron touch panel to control the system, Polycom HDX8000 units with firmware 18.104.22.168-38311, and with clear one handling the audio.
I may mention that I am not a expert in any of these areas, but our current vendor support is stumped and I am looking for anything from resolutions to who may be useful in helping us troubleshoot further. Thanks