Plantronics + Polycom. Now together as Poly Logo

Displaying all participants in Meeting?

Highlighted
Occasional Contributor

Displaying all participants in Meeting?

HDX 6000 endpoints and Cisco IP phones with RMX 1500 bridge.  We dial all endpoints and IP phones into a Meeting Room for a conference.

 

Is it possible to display on the HDX unit who all isconnected into the Meeting?  I see the list of participants on the RMX 1500 bridge, however need to find out if there is a way to view this list on the HDX unit.

 

Thanks.

Message 1 of 5
4 REPLIES 4
Respected Contributor

Re: Displaying all participants in Meeting?

You might try the "*88" command from the HDX.  It will give you a numbers list of site..  If you need a bit more, enable "the Gathering" and you will get more information..

 

See if that help!

 

 

Gary Miyakawa

Wanna' Test your H.323 System? (71.14.2.157 or 71.14.2.158)
cb157.miyakawa.us and cb158.miyakawa.us
www.miyakawa.us
www.codecsidekick.com
Message 2 of 5
Highlighted
Occasional Contributor

Re: Displaying all participants in Meeting?

Gary,

 

Thank you for the information.  I have been looking at this, and is it possible to enable "Gathering" and display after a conference call starts when a new audio endpoint would join the call?  For instance, I need to be notified on all endpoints when an additional audio or video endpoint would join like in the middle of an hour meeting, after the meeting would begin...not just the first 3-4 minutes.  

 

Is this possible?  If not, is it possible to enable playing like a ring tone when someone would join?

 

Thank you.

Message 3 of 5
Highlighted
Respected Contributor

Re: Displaying all participants in Meeting?

Depending on what version of RMX, there are some options.    What version are you on ?

 

BTW, is just showing a count for Audio and video good enough or do you need to know the name of the participant ?

 

thanks,

 

GaryM

Wanna' Test your H.323 System? (71.14.2.157 or 71.14.2.158)
cb157.miyakawa.us and cb158.miyakawa.us
www.miyakawa.us
www.codecsidekick.com
Message 4 of 5
Highlighted
Occasional Contributor

Re: Displaying all participants in Meeting?

Gary,

 

We are currently on

 

RMX MCU Version: 7.6.0.172

 

RMX Manager Version: EMA-V7.6.0.141

 

We need to have the audio caller name to display on the Polycom unit when that audio participant would join the meeting, regardless of when that caller joined.  Is this possible?  If not, what additional options do we have? 

 

Thanks.

 

Message 5 of 5