Plantronics + Polycom. Now together as Poly Logo

Eagle Eye Acoustic Technical Drawings

Occasional Visitor

Eagle Eye Acoustic Technical Drawings

Hello, I need a technical drawing of this camera, that I could construct it to a mobile Cart.


How big is the hole for the screws and how long



Message 1 of 4
Polycom Employee & Community Manager

Re: Eagle Eye Acoustic Technical Drawings

Hello Arnd,

welcome to the Polycom Community.

The community's search function finds this post with the same question => here <= or => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.


Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 4
Occasional Visitor

Re: Eagle Eye Acoustic Technical Drawings

You didn't answer the original poster's question. He was asking about the Eagle Eye Acoustic Camera. Your links directed to different camera models (EE Director and EE IV) than the one he specifically asked for (Eagle Eye Acoustic). I have the same question. Not everybody want to put the camera sitting on the top of the display, especially with a movable cart. 


Specifically, is there a threaded screw insert on the Acoustic Camera for standard camera mounts? 

Message 3 of 4
Polycom Video EP PLM
Polycom Employee & Moderator

Re: Eagle Eye Acoustic Technical Drawings

No there is not a1/4 x 20 mounting bracket.  The camera fits on top of a monitor and is fairly secure.  There is also the RP Convene which is a display and high end audio system and which integrateds the codec on the back of the display and has a secure mount for the camera.


In the dimensional drawings located on this forum there are drawings for most of the group video products that has details like this in it.  


Look here

Message 4 of 4