Plantronics + Polycom. Now together as Poly Logo

HDX-7000 Composite over S-Video Connector

SOLVED
Omar
Occasional Advisor

HDX-7000 Composite over S-Video Connector

we Installed HDX-7000 , with three cameras that has composite output.

 

these cameras are connected to switcher and then only one camera is connected to the HDX.

 

as there's no Video Input, we noticed that there's S-Video Input (Input #2) that can be configure as composite

 

so now this input is configured as composite and custom made cable is done as the attached file.

 

I tried 1&3 pin and then 2&4 pin . but i didn't get the camera signal .

 

the cameras are fine and giving display.

 

what am i missing.

 

Regards,

 

1 ACCEPTED SOLUTION

Accepted Solutions
Omar
Occasional Advisor

Re: HDX-7000 Composite over S-Video Connector

the problem is solved now i just toggled between people and content and toggeled back it's working now

View solution in original post

Message 2 of 2
1 REPLY 1
Omar
Occasional Advisor

Re: HDX-7000 Composite over S-Video Connector

the problem is solved now i just toggled between people and content and toggeled back it's working now

View solution in original post

Message 2 of 2