I have a similar but different issue.
I am still able to make calls and can hear the audio play back to me from a test site (184.108.40.206), so my unit is still configured. however my codec is not outputting any video.
I've tried different displays and am out of ideas.
I tried your suggestion for the above issue, this did not work for this problem.
Hello @j.hewitt ,
welcome to the Polycom Community.
Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
As a reminder the basic information asked for:
Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Polycom to have an overview of the current software used. In addition providing all details at the same time allow us to check logs or look up a potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.
Please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up post’s.
I will copy & past this question on your other double post => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.