HDX Quad Bri pin out

[Anonymous]

Anybody had the pin out for teh Quad BRI module to HDX cable?

[Ahmed-Shabana]

it is pin to pin stright cable, any network cable work with you. you may need to remove a small shaft from the side of the RG45 connector to correctly fit into the module.

[Polycom_Video_E]

If you are asking about the RJ45 connection between the module and the codec it is referred to as the P-Link connection and the only cable supported for that connection is the one available from Polycom.  The use of any other cable can result in undesired results, including any attempt to extend it.  The extension should be made between the ISDN termination and the H.320 module.

Cabling diagrams are in the IRM, Integrator's Reference Manual, for cables which can be 'field' made.