Plantronics + Polycom. Now together as Poly Logo

HELP content share Polycom RealPresence Grup 500, with Benq InstaShow WDC10

Occasional Visitor

HELP content share Polycom RealPresence Grup 500, with Benq InstaShow WDC10

HI

As the title says, in a nutshell I can not send content via the BenQ InstaShow (wireless projection hardware) to send the content the second screen is shown in Black. The screen that should show would be the next pantalla de inicio

 

Sometimes it manages to send a bit of image but it seems that it does not support the resolution or the frames, and it is reached to see a little of the welcome image of the Instahow these are the specifications of the hardware specs.

 

On the other hand sometimes on the main screen shows me this legend For optimum quality, Select a refresh rate of 60 Hz or less

 

In Configurations-monitors and tried with all possible resolutions and none works, similarly I do not see an option as such where you can lower the output frequency to the screens, that could be the Solution.

 

finally, This system (Benq Instashow) I have tested in two Polycom Realpresence Grup 500 and the result is the same equipment have system1 and system2

 

Thank you very much and I hope to support me in finding a solution

 

 

Message 1 of 5
4 REPLIES 4
Polycom Employee & Community Manager

Re: HELP content share Polycom RealPresence Grup 500, with Benq InstaShow WDC10

Hello @Isaac.vargas,

 

welcome to the Polycom Community.

 

I assume this is caused by:

 

Jul 12, 2016 Question:What is HDCP?

Resolution: HDCP stands for High-bandwidth Digital Content Protection to prevent copying of digital audio and video content as it travels across connections as explained in detail => here<= 


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 5
Highlighted
Occasional Visitor

Re: HELP content share Polycom RealPresence Grup 500, with Benq InstaShow WDC10

What am I supposed to do to make it work?

Message 3 of 5
Polycom Employee & Community Manager

Re: HELP content share Polycom RealPresence Grup 500, with Benq InstaShow WDC10

Hello @Isaac.vargas,

 

as the reply is based on an assumption I would look at a device which removes the copy protection.

 

The next step would be to open a support ticket,


In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

End Customers are unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter providing your MAC address or your Polycom devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Polycom device from.

If the unit is no longer within warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 5
Occasional Visitor

Re: HELP content share Polycom RealPresence Grup 500, with Benq InstaShow WDC10

If your issue is HDCP, you could try a simple 1x2 HDMI splitter in between the BenQ piece and the GS500.  Typically the 1x2 will "strip" HDCP from the signal.

 

Something like this.

 

If it isn't HDCP...well I'd get Polycom involved.

Message 5 of 5