Plantronics + Polycom. Now together as Poly Logo

HTTPS REST API for G700

chainlesslove
Occasional Visitor

HTTPS REST API for G700

Dear all

 

Is there an HTTP/s REST API on the RealPresence Group 700? And if yes, any documentation available? I was searching the community platform here and doc's from poly, but did not found any.

 

Br, René

Message 1 of 4
3 REPLIES 3
SteffenBaierUK
Polycom Employee & Community Manager

Re: HTTPS REST API for G700

Hello @chainlesslove 

 

Welcome to the Poly Community.


No there is no REST API for the GroupSeries. Just Telnet commands as explained in the FAQ:

 

Jun 23,2014 Question: Can I use a API with a HDX or RealPresence Group Series video systems?

Answer: Please check the relevant Integrator's Reference Manual => here <=. Please note that the Telnet Port 24 is being used.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 4
chainlesslove
Occasional Visitor

Re: HTTPS REST API for G700

Hi Steffen

 

The availbility of the telnet api on port 24 (if setup) I did know. But even for this one, I did not find any related documentation specific for the G700. I only found this one for the G7500, but commands still work for the G700 as well:

 

Polycom G7500 Command-Line API Reference Guide - 2.0

 

Still I would prefer an https rest api available, but will work it out with telnet then.

 

Br, René

Message 3 of 4
SteffenBaierUK
Polycom Employee & Community Manager

Re: HTTPS REST API for G700

Hello @chainlesslove ,

 

The GroupSeries is not yet end of life but to my own personal knowledge, there is no new development so there is no REST API.

 

The "old" method gong back to the VSX or HDX day's has always been as documented in the INTEGRATOR REFERENCE GUIDE guide >here<

 

Version 6.2.2 is the current latest.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 4 of 4