Plantronics + Polycom. Now together as Poly Logo

How to connect second TV/Monitor with HDX6000

Fazlay
Occasional Visitor

How to connect second TV/Monitor with HDX6000

Hi,

We have few HDX6000 installed for point to point and point to multipoint (done by our RMX1500) conference.

All the site has single Monitor (Sony LCD TV) connected with the supplied HDMI cable. Now we want to add a second monitor to few sites for getting content.

Question: How should I connect the second TV/Monitor ?

Thanks in advance.

Fazlay

Message 1 of 6
5 REPLIES 5
YashPal
Valued Contributor

Re: How to connect second TV/Monitor with HDX6000

its not a big deal,just connect your display physically with codec port avilable for it and then enable it from codec side to get it active and select the part you want desplay over that moniter.

 

 

Regards

 

Yash Pal

 

BR
Yash
Message 2 of 6
SteffenBaierUK
Polycom Employee & Community Manager

Re: How to connect second TV/Monitor with HDX6000

Hello Fazlay,

welcome to the Polycom Community.

I recommend to always visit the relevant support page for the HDX600 => here <=

 

Both the Setup Guide => here <= on Page 1 or the admin guide => here <= on Page 3-2 show that only 1 Monitor is possible.

 

The supported format is either DVI or HDMI

 

Please work with your Polycom reseller in case you require additional support.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 3 of 6
Fazlay
Occasional Visitor

Re: How to connect second TV/Monitor with HDX6000

Hi Yash,
Thanks for your quick reply. Problem is the HDX6000 has only one HDMI port where the primary TV is already connected. So, I am not sure where should I connect the second TV for content showing. 

Thanks.

Fazlay

Message 4 of 6
SteffenBaierUK
Polycom Employee & Community Manager

Re: How to connect second TV/Monitor with HDX6000

Hello Fazlay,

 

please check the correctly supplied information posted by myself.

 

Best regards

 

Steffen Baier

----------------
The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 5 of 6
hab
Frequent Advisor

Re: How to connect second TV/Monitor with HDX6000

HDX6000 supports only one monitor, if you want to dual-monitor - you must install HDX7000

Message 6 of 6