Hello,
Is there a way to launch the group series RP touch UI remotely and control the system?
Using the Zoom connector to manage the group series endpoints provides this functionality whether you have an RP touch paired or not. I'm assuming there is some built in UI on the Group that could be connected to when browsing to the Group's IP....?
Any information would be very much appreciated.
Thanks
Sean
Solved! Go to Solution.
https://192.168.99.249/touch/index.html
Swap in the IP of your system.
You need to login first using the normal web gui before you try to open the touch link.
https://192.168.99.249/touch/index.html
Swap in the IP of your system.
You need to login first using the normal web gui before you try to open the touch link.
Thank you very much!!
Hello @Sean.Stanley66 and @MichaelLevesque ,
Welcome back to the Poly Community.
Please be aware that the shared method is not officially supported and may be removed at any point.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier