Plantronics + Polycom. Now together as Poly Logo

Mixing Realpresence Group 300 et realpresence group500 to have multipoint video and content sharing

sannydiallo@hotmail.com
Occasional Contributor

Mixing Realpresence Group 300 et realpresence group500 to have multipoint video and content sharing

Hi All

Can you tell me if it's possible to have multipoint video and content sharing betwen 3 sites when:

- the main site have realpresence group 500

- the two other sites have realpresence group 300

 

Please confirm if when a call is initiated from the main site with the two other site, all the three site can have multipoint video and see the shared content. I already know that the audio will be working.

Urgent attention please before equipment purchase.

Message 1 of 2
1 REPLY 1
Video EP PLM
Trusted Contributor

Re: Mixing Realpresence Group 300 et realpresence group500 to have multipoint video and content shar

Assuming the network is 'right', whihc means that you can do point to point calls from the host site you should be able to do MP calls.  I say should because it depends on the network and the firewall being able to support it.

 

As far as the video, audio and content.  Any EP which supports MP software wil be able to support video, audio and content to the maximum number of sites that the system can support.  So your scenero of the host being a RPGS 500 with the multipoint software and the far ends being RPGS 300s will be able to share video, audio and content between them as long as the network is in place to support it.

Message 2 of 2