We bought 2No's HDX7000HD series VC bundle and installed in two different location with our service provider ,
Setup was made as below ,
Admin Settings / Network / IP Network / Firewall
on this page enable "fixed Ports" 3230-3235, UDP 3230-3280
set NAT configuration to "auto" (your public WAN ip should appear under the field, if not, set the value to manual and enter your ( WAN IP as 184.108.40.206)
Disable NAT is h.323 compatible
I dialed polycom test site from both device Device # 1 working fine and connection was established and can see video and audio
Device #2 : Connection was establishes but there is no video / only audio , Incoming data is nil ( Sometime i am getting audio and video & when i make call from this device to Device # 1 I am not able to make H.323 call its calling as SIP ,
What could be the issue , Please help me to fix this issue
Thanks - Saran
welcome to the Polycom Community.
The community's Video FAQ contains this post here:
The above Admin Guide and FAQ explaining how to troubleshoot this should help you.
Please ensure in the future to provide important details like the software version etc.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
Thanks for your prompt response ,
If i am not wrong the below ports needs to open when we use Dynamic IP address ,
TCP 49152 => 65535 for additional signalling
But our case, we are using Statis Public IP Address ( Device #1 - 220.127.116.11 & Device#2 - 18.104.22.168) & we made same setting for both devices ..
Device # 1 - Working perfect (H.323 call) .. (Tested with polycom 22.214.171.124 )
Device # 2 - call established , but cant able to see farend video , Few times i received video and audio but not stable (H.323)
DEVICE - HDX700 HD
Software version - 3.1.6 46064
Hardware version -Type D
Please scan those public IP address and guide us ..