Plantronics + Polycom. Now together as Poly Logo

Poly Studio X30 / X50 in Teams Mode - URLs for authentication

SOLVED
CharlieC
Frequent Visitor

Poly Studio X30 / X50 in Teams Mode - URLs for authentication

Hi,

 

I have an environment where we have outbound SSL inspection. As the Poly device is in Teams mode it needs to connect to Microsoft's Company Portal for a certificate and authentication. This is currently failing as the traffic does not have a cert during the outbound communication. 

 

Does anyone have the URLs required for this auth process? If I can whitelist them I can bypass the inspection process and let the devices authenticate directly. Currently I have to disconnect them from our network, connect to a public internet connection, authenticate the device, and place them back on the network. I cannot whitelist the origin IP address as there are multiple subnets and I want the devices to authenticate without having to add their addresses to the whitelist. 

 

Again, not the ports but the URLs required to authenticate the device.

 

Any help is greatly appreciated. 

 

Current software version of Poly is 3.4.0-292042. 

 

Charlie 

Message 1 of 3
1 ACCEPTED SOLUTION

Accepted Solutions
mshu
Esteemed Contributor

Re: Poly Studio X30 / X50 in Teams Mode - URLs for authentication

Message 2 of 3
2 REPLIES 2
mshu
Esteemed Contributor

Re: Poly Studio X30 / X50 in Teams Mode - URLs for authentication

Message 2 of 3
CharlieC
Frequent Visitor

Re: Poly Studio X30 / X50 in Teams Mode - URLs for authentication

Thank you @mshu. 

Appreciate your response. 

Message 3 of 3