Plantronics + Polycom. Now together as Poly Logo

Polycom Endpoints adding to Cisco TMS

SOLVED
VC Engineer 2014
Occasional Contributor

Polycom Endpoints adding to Cisco TMS

Hi Guys

 

Does anyone know if its possible to add Client Endpoints to the Cisco Telepresence Management Suite? 

If so, how is this done?

What kind of Issues will I expereince regarding error messages? 

 

Would be very greatful if someone can advise me on this...

 

Thanks 

 

 

Message 1 of 2
1 ACCEPTED SOLUTION

Accepted Solutions
Chris_Swinney
Advisor

Re: Polycom Endpoints adding to Cisco TMS

Hi VC Engieer,

 

It depends on what endpoint you want to add (I'm not sure of the Group series are supported, but the HDXs will work). Obviously, their is also limited functionality, In addition you need to ensure that you havn't tied down the management ports on the Polycom, such as Telnet and port 24, and possibly SNMP.

 

We have an issue with this as we don't send any management or api communication over an unencrypted port. It is something we have raised with Polycom in the past, but as yet these port are still used and required (to the best of my knowledge).

 

You might find more information in setting up TMS on the Cisco Telepresence forums.

 

Cheers

 

Chris

 

 

 

View solution in original post

Message 2 of 2
1 REPLY 1
Chris_Swinney
Advisor

Re: Polycom Endpoints adding to Cisco TMS

Hi VC Engieer,

 

It depends on what endpoint you want to add (I'm not sure of the Group series are supported, but the HDXs will work). Obviously, their is also limited functionality, In addition you need to ensure that you havn't tied down the management ports on the Polycom, such as Telnet and port 24, and possibly SNMP.

 

We have an issue with this as we don't send any management or api communication over an unencrypted port. It is something we have raised with Polycom in the past, but as yet these port are still used and required (to the best of my knowledge).

 

You might find more information in setting up TMS on the Cisco Telepresence forums.

 

Cheers

 

Chris

 

 

 

View solution in original post

Message 2 of 2