Plantronics + Polycom. Now together as Poly Logo

PrimaryCamera setting

jaroslavurban
Occasional Contributor

PrimaryCamera setting

Hi everyone,

I am just really trying to change the primarycamera for our HDX6000 (API 3.1.1). It supose to work, but I have no luck. 

 

I have both camera set at the config and both input are connected. #1 is the eye camera from Polycom, #2 is to my screen laptop connected over DVI cable. I use Telnet connection for setting, using the command: "systemsetting primarycamera 2"

it does not work for me, funny is when I replace 2 for 1, it restarts system correctly. based on API documentation 1,2 shoudl be allowed for HDX6000.

 

Anyone trying this? Any experience, good or bad? Any tip woudl be appriciated.Thx.

 

Jaroslav

Message 1 of 3
2 REPLIES 2
Video EP PLM
Trusted Contributor

Re: PrimaryCamera setting

If you do this from the UI, do you get the same results?

 

Message 2 of 3
jaroslavurban
Occasional Contributor

Re: PrimaryCamera setting

Hi, I did not find any place I could change it at UI. 

Message 3 of 3