Plantronics + Polycom. Now together as Poly Logo

QDX 6000 and HDX 7000 working with Sony BRCZ330

SOLVED
MariaT
Occasional Contributor

QDX 6000 and HDX 7000 working with Sony BRCZ330

Good afternoon, 

 

Is it possible to use a Sony BRCZ330 PTZ with the units  QDX 6000  or HDX 7000 at the place of the EagleEye (as eaither primary or seconday)?.We already have that cameras and would like to integrated with polycom,.Thanks

 

Message 1 of 3
1 ACCEPTED SOLUTION

Accepted Solutions
Video EP PLM
Trusted Contributor

Re: QDX 6000 and HDX 7000 working with Sony BRCZ330

In the release notes for the product lines there is an interoperability section which defines the cameras which Polycom has tested and supports.

 

Other VISCA controlled cameras may work as long as the output of the camera matches the format, resolution and frame rate.  It is best to check the release notes and the User's Guide for supported formats and resolutions.

 

I checked the specifications of the camera, it has S-video, component and YPbPr outputs and supports VISCA. This should work on the HDX and the QDX. The one open on the HDX is if the IR will act as a receiver for the HDX remote as the only IR receiver for the HDX 7000 comes from the camera. There is not an IR receiver on the chassis.

View solution in original post

Message 2 of 3
2 REPLIES 2
Video EP PLM
Trusted Contributor

Re: QDX 6000 and HDX 7000 working with Sony BRCZ330

In the release notes for the product lines there is an interoperability section which defines the cameras which Polycom has tested and supports.

 

Other VISCA controlled cameras may work as long as the output of the camera matches the format, resolution and frame rate.  It is best to check the release notes and the User's Guide for supported formats and resolutions.

 

I checked the specifications of the camera, it has S-video, component and YPbPr outputs and supports VISCA. This should work on the HDX and the QDX. The one open on the HDX is if the IR will act as a receiver for the HDX remote as the only IR receiver for the HDX 7000 comes from the camera. There is not an IR receiver on the chassis.

View solution in original post

Message 2 of 3
MariaT
Occasional Contributor

Re: QDX 6000 and HDX 7000 working with Sony BRCZ330

Thank you so much for your help and quicky answer. Nice tip about the release note.

It looks like we will be using the QDX. Thanks again.

Message 3 of 3