-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Video Conferencing
- Meeting Room Solutions
- QDX Far End Video Problem
Create an account on the HP Community to personalize your profile and ask a question
08-06-2012 02:15 PM
Well, QDX is not showing far end video while, far end could watch and hear us correctly. Its frustrating now and we don't know what to do? We had tried everything and it's not working.
Self View is on and camera is working fine too but while QDX is connecting, we can not view far end video. Please help us.
Solved! Go to Solution.
Accepted Solutions
08-06-2012 10:34 PM
Hi akchishti,
this sounds like a firewall / NAT Issue.
Enable fixed ports, set NAT to manually and enter your WAN IP address in the corresponding field.
Open the following ports on your firewall and forward them to the internal ip address of the qdx:
Port 1720 (TCP) H.323 Call setup (Must be bi-directional)
and the range that is shown when enabling fixes ports.
Try to call your far side video system again.
08-06-2012 10:34 PM
Hi akchishti,
this sounds like a firewall / NAT Issue.
Enable fixed ports, set NAT to manually and enter your WAN IP address in the corresponding field.
Open the following ports on your firewall and forward them to the internal ip address of the qdx:
Port 1720 (TCP) H.323 Call setup (Must be bi-directional)
and the range that is shown when enabling fixes ports.
Try to call your far side video system again.
Didn't find what you were looking for? Ask the community