We are currently in the process of deploying around 12 RP Group 500 series VC units in our office and are restricted on the number of public IP addresses we can use to NAT the units through the firewalls, does anyone have any suggests on how we can deploy the devices using 1 or 2 Public IPs?
Thanks in advance.
Hi Ashely. We currently have the following in our environment-
2x gs 500
1x gs 310
1x trio 8800
2x hdx 4500
3x cisco dx 80s
all running off a single IP. We do regular testing and conferencing using both h.323 and sip registered and unregistered with no issue. If you are just doing outgoing calls this shouldn't be an issue. for h.323 you might run into some problems with media latching. If you are going to be doing point to point calls you'll need a gatekeeper.